- Welcome to Copy Handler Community Forum.
Recent posts
#21
General forum topics / Re: Improve USB flash drive pe...
Last post by Ixen - July 20, 2021, 03:42:22 PMIs it slow when reading or writing to usb drive?
Currently CH write speed might be limited by the way it writes data to a file.
Currently CH write speed might be limited by the way it writes data to a file.
#22
General support / Re: Updatecheck reports new ve...
Last post by Ixen - July 20, 2021, 03:39:49 PMIt seems like somewhere in the release process version was not bumped to 1.46. For now I've implemented a workaround that does not need creating a new build.
#23
Ideas / Re: READ BEFORE POSTING IN THE...
Last post by Ixen - July 20, 2021, 03:32:57 PMFixed. Thanks!
#24
Ideas / Re: READ BEFORE POSTING IN THE...
Last post by ajw625 - June 17, 2021, 06:06:28 PMI tried this link:
http://www.copyhandler.com/en/request-a-feature
It displays the menu, but is otherwise blank.
I googled "copy handler request a feature" and found this link that works:
https://www.copyhandler.com/request-a-feature
http://www.copyhandler.com/en/request-a-feature
It displays the menu, but is otherwise blank.
I googled "copy handler request a feature" and found this link that works:
https://www.copyhandler.com/request-a-feature
#25
Ideas / Automatic Retry with configura...
Last post by ajw625 - June 17, 2021, 05:48:49 PMI started a copy operation yesterday that Copy Handler estimated would take about 20 hours. The copy was to a network share in another location, over internet, so it was a bit slow. For some reason the copy operation had an error in the middle of the night and it sat there waiting for me to click "Retry", which I did in the morning, and the copy continued.
It would be great if you could add an Automatic Retry option and allow the interval/frequency of retries to be configured in minutes or seconds. My suggestion would be to have this feature enabled by default with an interval of 5 minutes.
It would be great if you could add an Automatic Retry option and allow the interval/frequency of retries to be configured in minutes or seconds. My suggestion would be to have this feature enabled by default with an interval of 5 minutes.
#26
General forum topics / Improve USB flash drive perfor...
Last post by JohnCoool - May 04, 2021, 04:27:27 PMI am trying to find a way to enhance the performance of my USB stick.
It currently starts at around 60-300MB/s with the default Windows copier, then it dips down to 7-10MB/s for large files.
I read online that it is caused by the buffer getting filled then it just works without the buffer.
I don't have the feature as suggested on the driver to enable write cashing. So it is a limitation from the Hardware.
I did try this program and a few settings but it just stays at around 5-8MB/s. The speed did not go any higher than that.
Is there a way to use the program to overcome this issue so that it keeps clearing the buffer and it works at maximum speed?
It currently starts at around 60-300MB/s with the default Windows copier, then it dips down to 7-10MB/s for large files.
I read online that it is caused by the buffer getting filled then it just works without the buffer.
I don't have the feature as suggested on the driver to enable write cashing. So it is a limitation from the Hardware.
I did try this program and a few settings but it just stays at around 5-8MB/s. The speed did not go any higher than that.
Is there a way to use the program to overcome this issue so that it keeps clearing the buffer and it works at maximum speed?
#27
General support / Updatecheck reports new versio...
Last post by botcherO - April 11, 2021, 09:08:52 AMHi Ixen,
the updatecheck seems to check against the wrong build number.
The latest stable is 1.45.1048.0 from 2020-12-24, but it wants to have 1.46.1048.0 from 2020-12-24 in stable or rc channel.
See picture.
the updatecheck seems to check against the wrong build number.
The latest stable is 1.45.1048.0 from 2020-12-24, but it wants to have 1.46.1048.0 from 2020-12-24 in stable or rc channel.
See picture.
#28
General support / Re: How to automatically verif...
Last post by Ixen - March 30, 2021, 07:35:30 AMCH does not have such functionality.
#29
General forum topics / Re: How to list all my previou...
Last post by Ixen - March 30, 2021, 07:34:53 AMPlease check "Show posts" in your profile.
#30
General forum topics / How to list all my previous fo...
Last post by thoste - March 23, 2021, 01:09:27 PMIf I go to forum search I have to enter at least two chars which is not appropriate to search all my postings
* is not accepted
* is not accepted
SMF spam blocked by CleanTalk